Error code SC542 indicates a problem with the fusing unit of the Ricoh Aficio Printer. The fuser is the part of the printer that melts the toner onto the paper and uses both heat and pressure to do so. When this error code appears, it means that there is something wrong with either the temperature or the pressure in the fuser. This can be caused by a number of factors, including a faulty thermistor, low voltage to the fusing assembly, or a build-up of toner on the fusing roller. This article will show you how to fix the Ricoh printer error sc542. Follow these simple steps and your printer will be up and running in no time!
How To Fix Ricoh Printer Error SC542 Windows 10
Power Cycle Your Printer: First, you can try power cycling the printer. To do this, simply turn off the printer and unplug it from the power outlet. Wait for 30 seconds and then plug the printer back in and turn it on. This will sometimes clear the error code and allow the printer to function properly again.
Reset Your Printer: If power cycling the printer does not work, you can try resetting the printer. To do this, simply turn off the printer and unplug it from the power outlet. Wait for a few minutes and then plug the printer back in and turn it on. Once the printer is turned on, press and hold the “Reset” button for five seconds. This will reset the printer and hopefully clear the error code.
Replace Fusing Assembly: If resetting your printer does not work, you may need to replace the fusing assembly. This is a relatively easy fix and can be done by following the instructions in your printer’s manual. Once you have replaced the fusing assembly, your printer should be working properly again.
Also Read: How To Fix Ricoh Printer Offline Error?
By Using Printer Keys: In order to fix this error follow the steps below :
- Press “C” on the Button panel.
- Then press the number “1,0,7”.
- Now hit the “start” button and you will see the “maintenance screen”.
- look for “engine maintenance” and hit “ok”.
- Then Search “Fuser SC Reset” Then Hit Ok.
- On the next screen, you will get “Are you sure to execute”, Press the execute button.
- After following the above steps, reboot your printer and check if the error is resolved or not.
Check this video for the step-by-step instructions:
Conclusion :
These are the four methods that you can try to fix Ricoh printer error code SC542. These methods work for all the different series like sp, mp, sc and etc. We hope one of these solutions works for you and your printer starts working again. If not, please feel free to contact us and we would be happy to help you out.